BLUETTI AC70P 864Wh — power station 1000W (peak 2000W), LiFePO4 3000+ cycles, UPS, Turbo 80%/45 min, Solar 500W

Description BLUETTI AC70P 864Wh — power station 1000W (peak 2000W), LiFePO4 3000+ cycles, UPS, Turbo 80%/45 min, Solar 500W

BLUETTI AC70P — a portable power station for home, cottage, and trips when you need a compact, quiet, and safe energy reserve. The 864 Wh capacity and 1000 W inverter (2000 W peak) let you power household appliances and gadgets, while the pure sine wave makes it suitable for sensitive electronics.

⚡ 1000 W power + 2000 W peak

• 1000 W rated — stable operation of key devices.

• 2000 W peak — reserve for starting loads.

• 2× AC 220V — convenient for household appliances.

🚀 Turbo charging: 80% in 45 minutes

The 850 W turbo input allows you to quickly top up the charge: up to 80% in just 45 minutes — convenient when you need to quickly get ready for a trip or outages.

☀️ Solar charging up to 500 W

Support for solar panels up to 500 W — approximately about 2 hours in good sun (the specs state ~2.2 hours).

🔋 LiFePO4 + BMS: lifespan and safety

The LiFePO4 battery retains up to 80% capacity after 3000+ cycles, and the BMS system controls protection and operating stability.

🔄 UPS/pass-through charging

The station supports UPS/pass-through charging — useful for backup power and scenarios where it’s important not to “drop” power when mains is available.

🔌 8 devices at once + wireless charging

Connect everything at once: AC, DC, USB-A, 2×USB-C 100W (PD) and wireless charging — convenient at home and on the road.

📲 Control via the BLUETTI app

Monitoring and control via the app — quickly track charge, input/output, and modes.

📌 Specifications

• Brand / model: BLUETTI AC70P

• Category: 500–1000 W

• Capacity: 864 Wh

• Rated power: 1000 W

• Peak power: 2000 W

• Inverter: pure sine wave

• Battery: LiFePO4 (3000+ cycles to 80%)

• UPS (pass-through charging): supported*

• Charging from mains: ≈ 1.5 hours

• Turbo charging: 850 W, up to 80% in 45 minutes

• Solar charging: ≈ 2.2 hours, solar input up to 500 W

• Number of devices connected simultaneously: up to 8

• AC outputs: 2 × AC 220V

• DC output: 1 × 12V/10A

• Car port: 1 × DC 12V/10A

• USB-A: 2 × 12W max

• USB-C: 2 × 100W (PD)

• Wireless charging: yes

• Management system: BMS

• Display: yes

• Flashlight: no

• Weight: 10.7 kg

• Dimensions: 314 × 209.5 × 255.8 mm

• Battery expansion (per description): B80P / B230 / B300

⚠️ Note (important)

• Solar charging time depends on the weather, panel installation angle, and the array’s actual output; the ~2–2.2 hours figure is valid under near-maximum conditions.

• The UPS/pass-through charging mode is useful for backup power, but the final scenario depends on the connected load.

• “2000 W peak” is a short-term reserve; for continuous load, use 1000 W as your reference.

🔥 Add-on

AC70P is the golden mean for “home + trips”: 864Wh of energy, 1000W of power, Turbo 80% in 45 minutes, and 500W solar input. Plus 2×100W USB-C and wireless charging — to cover both household needs and gadgets with one device.